Complete Commercial Refrigeration offers both custom designed and pre-engineerined walk-in cooler/freezers from industry leading manufacturers.

Kolpak Walk-Ins

Kolpak is one of the industry leaders in refrigeration and cold storage. Kolpak was founded in 1969, and acquired by The Manitowoc Company in 1995. Kolpak is one of the foodservice industry’s specified leaders in the manufacturing of custom walk-in coolers and freezers. Kolpak's product offering includes refrigeration systems, self-contained walk-ins and step-ins, refrigerated warehouses, pre-assembled walk-ins, and walk-in accessories.

Kolpak offers a wide range of cold storage products such as:

  • Express Walk-in: The Express by Kolpak is a totally pre-assembled outdoor walk-in that's ready to cool when it arrives at your job site. All refrigeration is pre-installed, run and adjusted at the factory and the electrical components are wired to a fused disconnect mounted on the roof of the walk-in. This means that your Express is up and running as soon as an electrical contractor provides power to the disconnect. No refrigeration technician. No plumber. No adjustments
  • Polar-Pak Walk-in: Polar-Pak coolers and freezers are made with the same rugged, high performance construction that has made Kolpak the leader in walk-in refrigeration. The Polar-Pak modular panels of 4" 100% foamed in place non-CFC urethane foam offer superior insulating capabilities. The exterior and interior of top-quality galvanized metal offer an attractive and rugged metal finish. Polar-Pak also offers superior air circulation around the coils making it both economical and efficient to run.
  • Pre-Engineered Walk-ins: Made from the same quality panels and components that Kolpak is renowned for, you get all of the quality, flexibility, durability and energy efficiency you have come to expect. The Kolpak Pre-Engineered system consists of components that are ready-made and ready to assemble. By manufacturing and warehousing these components ahead of time, Kolpak can greatly reduce ship and installation time and in most cases reduce cost too, depending on your exact requirements.
  • Refrigerated Warehoueses: With its low cost modular construction, unsurpassed service Kolpak is an industry leader in walk-in refrigerated warehouses.  Complete Commercial Refrigeration understands that your project and may leave you needing a unique and specific refrigeration system to address your needs. Your project may require a unique refrigeration system based off of capacity, local codes, geographical conditions, and budget. In order to provide our customers with the highest quality solutions we work with companies like Kolpak to analyze your needs, then design, build, install and service a structure that delivers the rugged performance you want with a heritage of excellence from the combined resources with a tradition of excellence in highest quality construction and reliability.

Applications include:

  • Biological Clean Rooms
  • Ice Production
  • Frozen Food Storage
  • Perishable Goods
  • Morgues
  • Production/Processing
  • Environmental Control
  • Blast Freezer
  • Testing Labs
  • Chemical Storage

Thermo-Kool Walk-Ins

Thermo-Kool was established in Laurel, Mississippi, in 1960. The company’s founders set out to engineer the best quality walk-in refrigerators in the industry. Today, Thermo-Kool products are used by many of the best-known restaurants and institutions in the United States as well as in many foreign countries. Thermo-Kool walk-ins are designed for maximum customization, durability and performance which makes.

Thermo-Kool a great choice for any application. Thermo-Kool uses innovative processes which combine their patented Durathane high-density structural frame members and low-density urethane core insulation. This unique design offers superior strength, durability and insulation value to their walk-in panels. Thermo-Kool Walk-In Coolers have received “Best in Class” in every category for the 2014 Foodservice Equipment & Supplies magazine awards! 

Thermo-Kool Product Details & Value-Added Features:

  • Patented DURATHANE 100% urethane high density panel design
  • Patented UL listed door construction
  • A variety of metal finishes are available for all interior and exterior surfaces
  • Floor panels designed to withstand uniformly distributed stationary loads of 600 lbs per square foot
  • DURA-FLOOR heavy duty structural support floor
    • Interior NSF approved foamed-in-place ramp which is an integral part of the floor panel
    • Ten-year panel warranty to cover any defects in material or workmanship under normal use and service

 

ICS Walk-Ins

International Cold Storage was formed in the early 1950’s by a leader in the development and manufacturing of walk-in equipment. Today, ICS is a leader in the refrigeration industry with it’s diverse line of products and the ability to design, manufacture, deliver and install custom walk-in units, for indoor and outdoor use. ICS supplies a full line of refrigeration systems; including self-contained, remote pre-assembled, and rack integrated units.

The one-piece walk-in product is designed specifically for outdoor use and has fulfilled a need of the foodservice industry by providing a solution that helps reduce high construction costs normally associated with new or remodel construction projects. The overall footprint of the building is reduced by placing the walk-in unit on the outside of the structure, realizing a net savings in construction time, labor, materials and overall spending. International Cold Storage has numerous foodservice chain partners who for years have utilized the ICS one-piece and sectional designs for their walk-in needs.

Outdoor Walk-ins: An ICS walk-in outside your restaurant can help because it frees up the kitchen space. You can customize and have any combination of multi-temperature compartments you need. Work with our application specialists to create a unit with separate freezer, cooler and dry storage compartments – all configured to give you the optimum capacity for your inventories.

ICS Outdoor Walk-ins Include:

  • Sloped weatherproof roof
  • Outdoor refrigeration systems
  • Low ambient refrigeration controls
  • Fully insulated aluminum or stainless clad floors
  • Factory assembly eliminates the need for local installation labor
  • Ready-to-run refrigeration makes start-up immediate eliminating assembly
  • Single point electrical connection, simplifies start-up
  • Quality control in all phases of construction, insures consistent product quality

Indoor Walk-ins: The cam lock design makes sectional products great for any inside cooler or freezer application. Complete Commercial Refrigeration and ICS design team can quickly develop a solution that fits your exact needs and budget whether your configuration is a cooler, freezer, cooler/freezer combination, reach-in, cold room or dry room. With a wide choice of accessories and optional configurations, ICS can build your walk-in to meet your exact specifications.

ICS Indoor Walk-Ins Include:

  • Urethane insulation with a choice of insulation thicknesses available
  • Delivered knocked down and are easy to assemble, using built-in panel locks
  • Expandable by adding additional panels in the future
  • A variety of painted and unpainted finishes available
  • Meet sanitation, electrical, energy, and building codes throughout the U.S.A., Canada, and Mexico
  • Equipped with a variety of refrigeration equipment types, including self-contained, remote, split, with water or air cooled condensers
  • Antimicrobial finishes to eliminate bacterial growth